On Premises
Instalación de Integra Server
To install any version of Integra Server, you must:
Log in with the operative user created (ex: Integra)
Run the following commands to create a password for root and update the operative system to the last version.
sudo passwd root
sudo apt-get update
sudo apt-get upgrade
sudo sed -i "s/PasswordAuthentication no/PasswordAuthentication yes/" /etc/ssh/sshd_config
sudo sed -i "s/PermitRootLogin prohibit-password/PermitRootLogin yes/" /etc/ssh/sshd_config
Configure: sudo vi /etc/network/interfaces
Change:
auto eth0
iface eth0 inet dhcpfor:
auto eth0
iface eth0 inet static
address 192.168.X.X
network 192.168.1.X
netmask 255.255.255.0
broadcast 192.168.1.255
gateway 192.168.1.X
;up route add -net 192.168.1.128 netmask 255.255.255.128 gw 192.168.1.2
;up route add default gw 192.168.1.200
;down route del default gw 192.168.1.200
;down route del -net 192.168.1.128 netmask 255.255.255.128 gw 192.168.1.2
dns-nameservers 8.8.8.8
sudo apt-get install unzip curl
sudo rebootAfter it restarts:
Log in with root.
Download the last version of the uContact setup.
Change time zone
Run the following command:
Select the preferred time zone and press OK.
Remote access
Usually, for for anything regarding Support, it is necessary to configure a remote access. To do so we use OpenVPN AS.
Steps to install and configure the VPN:
From the client’s router configure DynDns, if their IP is public, it is dynamic.
From the client’s router redirect the 1194 port to the Integra Server where The OpenVPN AS is.
From the client’s router, if you want remote interns IAX, redirect the 4569 port to the Integra Telephony.
Install OpenVPN AS at one Integra server. Download it from: http://openvpn.net/index.php/access-server/download-openvpn-as-sw/113.html?osfamily=Ubuntu
Install the .deb.
Set it up with https://IPSERVIDOR/admin
Disable the field that allows the routing of the internet traffic across the VPN.